Published Nov 17, 2026, 2:30 PM EST Monica J. White is a journalist with over a decade of experience in covering technology. She built her first PC nearly 20 years ago, and she has since built and tested dozens of PCs. PC hardware is her main beat, and graphics cards and the GPU market at large are her main area of interest, but she has written thousands of articles covering everything related to PCs, laptops, handhelds, and peripherals. From GPUs and CPUs to headsets and software, Monica's always willing to geek out over all things related to computing. Outside of her work with How-To Geek, Monica contributes to TechRadar, PC Gamer, Tom's Guide, Laptop Mag, SlashGear, Whop, and Digital Trends, among others. Her ultimate goal is to make PC gaming and computing approachable and fun to any audience. Monica spends a lot of time elbow-deep in her PC case, as she's always making upgrades, testing something, or plotting out her next build. She's the go-to tech support person in her immediate circle, so she's never out of things to do. Whenever she has spare time, you'll find her gaming until the early hours and hanging out with her dog. It's been a rough time for Nvidia, what with all the scandal surrounding its ex-CEO Jensen Huang. But in a way, times have been tough for Nvidia's customers for quite some time, and for once, I'm not (only) talking about the eye-watering prices. The problem lies with Nvidia's GPU connectors, which have been melting since the RTX 4090. The problem, while niche, is still here years later, and worse yet, it affects GPUs that have no business having these kinds of problems. When are we ever going to see the end of it? The RTX 4090 started a problem we're still dealing with Four years later, we're still talking about melted connectors Let's travel back to October 2022, as this is when all of this began. Four years ago, when Nvidia released the RTX 4090, it was an absolute monster of a GPU, and it came with a shiny new 16-pin power connector called 12VHPWR. The idea was pretty simple: Instead of using several bulky 8-pin PCIe connectors, you could use a single cable capable of delivering up to 600W of power. Sounds lovely, right? Well, unfortunately, it didn't take long for things to go horribly wrong. Within weeks of the RTX 4090's launch, reports started popping up about melted connectors and damaged graphics cards. Nvidia investigated and pointed to improperly seated cables as a common cause, with around 50 cases reported globally at the time. The whole thing became a massive controversy, and understandably so. Imagine spending nearly $2,000 on a GPU, only to discover that the power connector is in constant jeopardy. (The RTX 5090 is way pricier, so at least there's that.) Eventually, Nvidia introduced the 12V-2x6, which added longer power contacts and shorter sense pins to make the connection safer. That was supposed to help address the problem, and to some extent, it did. Unfortunately, the issue remained. Reports of melted connectors continued through the RTX 40-series and into the RTX 50-series generation. Here we are, four years later, still worrying about the same thing. And the worst part? It's no longer just these ultra-power-hungry GPUs that are making headlines. Now even the RTX 5070 is melting its power connector Seriously? This isn't a 575W beast we're talking about here For a while, you could at least argue that the problem was limited to the most ridiculous GPUs in Nvidia's arsenal. In a way, that made it worse, because you've spent thousands of dollars only for the whole thing to go up in flames—but on the other hand, it also made more sense, as those GPUs tend to be intensely power-hungry. The RTX 5090 has a total graphics power (TGP) of 575W, which puts it uncomfortably close to the 600W rating of the 12V-2x6 connector. But the RTX 5070? That GPU draws just 250W, less than half of what the connector is rated to handle. And yet, VideoCardz reported another RTX 5070 with a melted connector on November 10, following an incident where the PC experienced black screens and unexpected reboots. The owner admitted that the cable might not have been fully inserted, so the exact cause remains unclear, but that's hardly reassuring when we're talking about a relatively modest midrange GPU. You'd think you can trust such a card, but apparently not. This wasn't even an isolated report. More than ten reports involving various RTX 40- and 50-series cards surfaced during the first two weeks of November alone. A power connector shouldn't be this easy to get wrong The problem is a lot more complicated than excessive wattage I've covered this whole melting connector saga from its very first days, and I've seen many proposed fixes, from adapters to undervolting. But throughout it all, I couldn't help but think that a simple connector shouldn't be too difficult to get right. The thing about these melting connectors, though, is that it's not necessarily the GPU's overall power draw that's causing the problem, which is why the likes of the RTX 5070 may also be at risk. The 12VHPWR and 12V-2x6 connectors distribute power across multiple electrical contacts, and ideally, the load should be shared between them. But if the connector isn't fully seated, or if some contacts aren't making a proper connection, things can go south pretty quickly. Poor contact increases electrical resistance, which generates heat, and uneven current distribution can leave individual contacts carrying more current than they should. Add excessive cable bending or strain near the connector into the mix, and you've got a recipe for disaster. Nvidia needs to do better than blaming PC builders Four years should be enough time to solve a design problem Throughout this saga, Nvidia, and other sources, often pointed to PC builders as the source of the problem. And I get it. I understand that plugging in a cable properly is the PC builder's responsibility. I've built enough PCs to know that user error can end in absolute disaster, and I'm not here to suggest otherwise. But here's my issue: Should something as simple as a slightly loose connector really have the potential to completely destroy a graphics card worth thousands of dollars? We're four years into this mess, and Nvidia has had plenty of time to work with its partners on a more reliable solution. Yes, 12V-2x6 was an improvement, but clearly, there's still room for more. Your GPU is probably fine, but its power cable deserves attention Before you start rushing to replace your GPU, let me tell you one thing: slow down. There's a high chance that it's completely fine. The point of this post is rather to bring awareness to the fact that despite the passing years and new technologies, this problem, which should never have been a problem, still persists. To keep your GPU safe, please make sure that the cable is fully inserted. There should be no visible gap, and it shouldn't be bent sharply or pulled sideways near the plug. Make sure you're using a cable approved for your specific PSU, too, because modular PSU cables aren't always interchangeable. It's always better to be safe than sorry when the risk is your GPU burning up.
We don't talk about Nvidia's biggest failure nearly enough, and your GPU may be suffering from it
Full Article
Original Source
Read the full article at Howtogeek →KhanList aggregates and links to publicly available news content. We do not host full articles from third-party sources. Always verify important information with original sources.