I built a local network map and discovered 4 Wi-Fi problems I didn't know I had

I built a local network map and discovered 4 Wi-Fi problems I didn't know I had

Published Nov 21, 2026, 5:31 PM EST Monica J. White is a journalist with over a decade of experience in covering technology. She built her first PC nearly 20 years ago, and she has since built and tested dozens of PCs. PC hardware is her main beat, and graphics cards and the GPU market at large are her main area of interest, but she has written thousands of articles covering everything related to PCs, laptops, handhelds, and peripherals. From GPUs and CPUs to headsets and software, Monica's always willing to geek out over all things related to computing. Outside of her work with How-To Geek, Monica contributes to TechRadar, PC Gamer, Tom's Guide, Laptop Mag, SlashGear, Whop, and Digital Trends, among others. Her ultimate goal is to make PC gaming and computing approachable and fun to any audience. Monica spends a lot of time elbow-deep in her PC case, as she's always making upgrades, testing something, or plotting out her next build. She's the go-to tech support person in her immediate circle, so she's never out of things to do. Whenever she has spare time, you'll find her gaming until the early hours and hanging out with her dog. You probably have a general idea of the kinds of devices you have connected to your home network. Laptops, desktops, phones, consoles, and all that jazz. But would you remember every single one if you had to make a full list? And more importantly, do you know the details, such as which access points they're using, which frequency bands they're connected to, or whether your mesh nodes are communicating the way they're supposed to? I thought I had a decent handle on my network, and then I decided to map the whole thing. The reality check was quick. My phone was connected to the wrong access point The nearest access point isn't always the one your devices choose Credit: Cory Gunther / How-To Geek Once my network map was fully assembled, one of the first things that jumped out at me was my phone's connection. It was listed as connected to the main router in my office, despite being in the living room, where there's a mesh satellite. Worse still, the signal strength was sitting at -76 dBm, which is pretty weak. Meanwhile, my TV, which was in that same room, sat at -51 dBm. That doesn't necessarily mean my phone would've received an equally strong signal from the satellite, but it certainly made me question why it was still hanging on to the main router. As I've pointed out before, mesh Wi-Fi isn't quite as seamless as manufacturers would have you believe. Your devices generally decide which access point to connect to, and sometimes they stubbornly refuse to switch, even when a better option is available. This is called a sticky client, and it can leave you dealing with poor speeds or unreliable connections for seemingly no reason. If you spot something similar on your own network, check your mesh system's roaming settings and try toggling Wi-Fi off and back on for the affected device. Sometimes, that's all it takes to encourage it to connect to a closer node. My laptop was still using 2.4GHz Good signal strength doesn't always equal a good connection If you follow my coverage here at How-To Geek, you've certainly heard me complain about my laptop. True, I'm a desktop gal, and my laptop can only hope to receive half the affection my desktop gets. But this whole network mapping process alerted me of the fact that I've been neglecting the laptop a little bit, or at least as far as its network is concerned. Despite being in the same room as my router most of the time, my laptop was connected to the 2.4GHz band on channel 1, with a signal strength of -45 dBm. Now, that's actually a pretty strong signal, so what's the problem? It's the 2.4GHz band, naturally. Any laptop that can use 5GHz should do so, and mine certainly can. The tricky part is that your router can be using band steering to encourage devices to connect to the most appropriate frequency, but that doesn't always work out the way you'd hope. Automatic band selection is worth keeping an eye on, and if your router keeps banishing devices to the 2.4GHz band even though you don't want that to happen, try to connect to the faster band manually (which is exactly what I did). The satellite wasn't connected through Ethernet Credit: Jerome Thomas / How-To Geek Here's another thing I spotted during this process, and it became painfully obvious through network mapping: my living-room mesh satellite was using wireless backhaul to communicate with the main router. Now, there's nothing inherently wrong with that, and it's how plenty of mesh systems are designed to work. The problem is that every device connected to that satellite, including my TV, console, and phone, has to send its traffic through an additional wireless link before reaching the router. Depending on the mesh system, that backhaul connection can compete with client devices for precious Wi-Fi airtime, potentially affecting speeds and latency. This is exactly why running just one Ethernet cable to a mesh node can make such a difference: a wired backhaul eliminates that wireless hop. My mesh nodes were sharing the same Wi-Fi channel Two access points don't necessarily mean twice the available airtime Another interesting discovery was that my main router and mesh satellite both appeared to be using channel 1 on the 2.4GHz band. At first glance, that doesn't sound like a big deal; after all, isn't the whole point of mesh Wi-Fi to have multiple access points working together? Well, yes. Sure. But there's a catch. When nearby access points operate on the same channel, they have to share the available airtime, taking turns transmitting data instead of doing so simultaneously. This is called co-channel contention, and it can affect performance when several devices are fighting for bandwidth. Of course, sharing a channel doesn't have to mean your network is congested, and many mesh systems coordinate their channel assignments automatically, but it's still worth checking your router's channel settings. How do you check this yourself? So, if you've read this far, you're probably wondering how to check all this yourself. The good news is that it was super easy to do. Start by logging into your router's admin panel, and look for a section called Connected Devices, Clients, or something along those lines. You should be able to see the devices connected to your network, along with their IP addresses and, depending on the router, their Wi-Fi bands, signal strengths, and associated access points. If your router doesn't provide enough info, a free tool like Fing can help you identify devices on your local network, while a Wi-Fi analyzer can reveal nearby networks and channel usage. From there, I used diagrams.net to make it into a fancy little diagram and built a map that I could actually make sense of.

Original Source

Read the full article at Howtogeek →

KhanList aggregates and links to publicly available news content. We do not host full articles from third-party sources. Always verify important information with original sources.