I 3D printed my own smart watch band and it went about as well as you’d expect

I 3D printed my own smart watch band and it went about as well as you’d expect

Published Nov 22, 2026, 10:00 AM EST Tim has been covering technology for almost 20 years, in that time spanning a broad range of topics from security to product reviews. He is especially focused on the Apple ecosystem, productivity, and consumer advice. Over the years Tim has written thousands of articles, reviews, and round-ups in addition to producing video content and original photography. A graduate of journalism, he found his footing as a freelancer with a laptop and loves how he is able to work from practically anywhere. Now a Senior Editor for iPhone, Mac, and Smart Home at How-To Geek, Tim still loves to write. He can also be found crafting round-ups and productivity posts for the Zapier blog. Earlier in his career Tim spent nearly a decade as a writer and eventually Apple section editor for MakeUseOf. Tim currently lives in Brisbane, Australia. Outside of work he loves to hike and work out, play video games, and spend quality time with his wonderful partner and two cats Inka and Roger. It can be tempting to use your 3D printer to solve every problem you encounter, but this is a fool’s errand. Not every issue can or should be fixed with a roll of filament. If you notice a lack of 3D-printed solutions, you should probably treat it as a sign. I chose to give it a shot anyway. My old Watch band is showing its age Apple wants $50 for a new one I have an Apple Watch Series 8 that’s four years old and sadly showing its age, but not quite as much as the original band that came with it. It’s frayed, dulled, and, because I exercise while wearing it, doesn’t exactly smell fresh (even when I wash it in non-Apple-approved cleaners). The Watch itself is also not quite what it used to be. It’s probably down to the fact that I almost never take it off and that I’ve beaten it up a fair bit. The ECG feature stopped working due to some sort of problem with the crown, and I can’t get it to accept the latest watchOS update, which is causing problems with iOS 27. For all its problems, it still tells the time and tracks workouts, which is all I really need. That said, I don’t really want to spend the $50 that Apple is asking for a new band when the Watch is likely to be decommissioned sooner rather than later. So, in a bid to spruce things up a little, I thought I’d try 3D printing a Watch band. For what it’s worth, the old one might not look the part, but It's still supremely comfortable, so a 3D-printed alternative has its work cut out. I printed my own band My curiosity got the better of me There aren’t as many Apple Watch bands as I thought there would be on MakerWorld. Of those that I found, some require TPU for a flexible finish (which I don’t have enough use for to really justify buying). The rest either use PLA or PETG, so I settled on PLA for a quick proof of concept. That was my first mistake. It limited me to “hard” watch band designs. I didn’t think this would be a huge issue since I’ve had metal links in the past and they work just fine. In the end, I went with a second-generation design that had only 20 downloads (including mine). The original design had a whopping 60. Mistake number two. I settled on this because it was a print-in-place band that looked pretty inconspicuous. Unlike some other bands, it didn’t require any aftermarket parts (which felt like it would defeat the point of printing something in the first place). I settled on PLA matte filament in black, and printed at the highest quality on my Bambu Lab P2S. Coming off the print bed, the band looked the part. It was oriented so that the texture of the print bed appears on the outside. At a glance, it looks like a band you’d buy rather than print. Unfortunately, that’s where the praise ends. Getting the band to attach to my Watch proved to be an ordeal. I had to really force it on there, after which it moved around a little too easily. Getting the clasp to close with one hand nearly took chunks out of my skin. I had to break out the sandpaper. Despite measuring, the watch was still a little bit loose on my wrist once I’d maimed my wrist and fingers. In a surprise to exactly nobody, the feeling of cheap PLA on your wrists doesn’t exactly spark joy. For short periods of wear, it’s fine, but there are some clear reasons why printing your own Watch band hasn’t taken off in a big way. Things to consider Not on my watch PLA isn’t exactly known for its durability, and if you wear your Watch in the shower or sweat in the gym as much as I do, then that’s going to be a problem. PETG would help greatly in this department, but it doesn’t do anything to solve that “Fischer Price chic” feeling on your wrist. It might even cause skin irritation long term. Beyond this, there’s a reason that many smartwatch owners are hesitant to use cheap or knock-off bands on their wearables, and that’s because they’re the only thing keeping an expensive gadget firmly on your wrist. $50 is worth it when the cost of replacing the Watch, even in its current condition, is $100 or more. I’m not trying to put the model author on blast; I think they did a fine job. I like the band’s design, its print-in-place links, and the overall look. But this does strike a familiar chord that many 3D printer owners will have to reckon with at some point: you can’t 3D print yourself out of every problem. Some things are worth buying You could have a lot of fun with this design, but it’s never going to be that comfortable. I’ve now accepted that Watch bands are yet another item that you’re better of buying rather than printing at home.

Original Source

Read the full article at Howtogeek →

KhanList aggregates and links to publicly available news content. We do not host full articles from third-party sources. Always verify important information with original sources.